- Art Gallery -

Sceptre was an early fusion power device based on the Z-pinch concept of plasma confinement, built in the UK starting in 1957. They were the ultimate versions of a series of devices tracing their history to the original pinch machines, built at Imperial College London by Cousins and Ware in 1947. When the UK's fusion work was classified in 1950, Ware's team was moved to the Associated Electrical Industries (AEI) labs at Aldermaston. The team worked on the problems associated with using metal tubes with high voltages, in support of the efforts at Harwell. When Harwell's ZETA machine apparently produced fusion, AEI quickly built a smaller machine, Sceptre, to test their results. Sceptre also produced neutrons, apparently confirming the ZETA experiment. It was later found that the neutrons were spurious, and UK work on Z-pinch ended in the early 1960s.

History
Background

For a detailed history of pinch in the UK, see ZETA

Fusion research in the UK started on a shoestring budget at Imperial College in 1946. When George Paget Thomson failed to gain funding from John Cockcroft's Atomic Energy Research Establishment (AERE), he turned over the project to two students, Stan Cousins and Alan Ware. They started working on the concept in January 1947,[1] using a glass tube and old radar parts. Their small experimental device was able to generate brief flashes of light. However, the nature of the light remained a mystery as they could not come up with a method of measuring its temperature.[2]

Little interest was shown in the work, although it was noticed by Jim Tuck, who was interested in all things fusion. He, in turn, introduced the concepts to Peter Thonemann, and the two developed a similar small machine of their own at Oxford University's Clarendon Laboratory. Tuck left for the University of Chicago before the device was built.[3] After moving to Los Alamos, Tuck introduced the pinch concept there, and eventually built the Perhapsatron along the same lines.

In early 1950 Klaus Fuchs' admitted to turning UK and US atomic secrets over to the USSR. As fusion devices would generate copious amounts of neutrons, which could be used to enrich nuclear fuel for atomic bombs, the UK immediately classified all their fusion work. The research was considered important enough to continue, but it was difficult to maintain secrecy in a university setting. The decision was made to move both teams to secure locations. Imperial team under Ware was set up at the Associated Electrical Industries (AEI) labs at Aldermaston in November[1] while the Oxford team under Thonemann were moved to UKAEA Harwell.[4]
Perhaps the earliest photograph of the kink instability in action - the 3 by 25 pyrex tube at Aldermaston.

By 1951 there were numerous pinch devices in operation; Cousins and Ware had built several follow-on machines, Tuck built his Perhapsatron, and another team at Los Alamos built a linear machine known as Columbus. It was later learned that Fuchs had passed information about the early UK work to the Soviets, and they had started a pinch program as well.

By 1952 it was clear to everyone that something was wrong in the machines. As current was applied, the plasma would first pinch down as expected, but would then develop a series of "kinks", evolving into a sinusoidal shape. When the outer portions hit the walls of the container, a small amount of the material would spall off into the plasma, cooling it and ruining the reaction. This so-called "kink instability" appeared to be a fundamental problem.
Practical work

At Aldermaston, the Imperial team was put under the direction of Thomas Allibone. Compared to the team at Harwell, the Aldermaston team decided to focus on faster pinch systems. Their power supply consisted of a large bank of capacitors with a total capacity of 66,000 Joules[5] (when fully expanded) switched by spark gaps that could dump the stored power into the system at high speeds. Harwell's devices used slower rising pinch currents, and had to be larger to reach the same conditions.[6]

One early suggestion to solve the kink instability was to use highly conductive metal tubes for the vacuum chamber instead of glass. As the plasma approached the walls of the tube, the moving current would induce a magnetic field in the metal. This field would, due to Lenz's law, opposed the motion of the plasma toward it, hopefully slowing or stopping its approach to the sides of the container. Tuck referred to this concept as "giving the plasma a backbone".

Allibone, originally from Metropolitan-Vickers, had worked on metal-walled X-ray tubes that used small inserts of porcelain to insulate them electrically. He suggested trying the same thing for the fusion experiments, potentially leading to higher temperatures than the glass tubes could handle. They started with an all-porcelain tube of 20 cm major axis, and were able to induce 30 kA of current into the plasma before it broke up. Following this they built an aluminum version, which was split into two parts with mica inserts between them. This version suffered arcing between the two halves.[1]

Convinced that the metal tube was the way ahead, the team then started a long series of experiments with different materials and construction techniques to solve the arcing problem. By 1955 they had developed one with 64 segments that showed promise, and using 60 kJ capacitor bank they were able to induce 80 kA discharges.[5] Although the tube was an improvement, it also suffered from the same kink instabilities, and work on this approach was abandoned.[7]

To better characterize the problem, the team started construction of a larger aluminum torus with a 12-inch bore and 45 inch diameter, and inserted two straight sections to stretch it into a racetrack shape. The straight sections, known as the "pepper pot", had a series of holes drilled in them, angled so they all pointed to a single focal point some distance from the apparatus.[5] A camera placed at the focal point was able to image the entire plasma column, greatly improving their understanding of the instability process.[7]

Studying the issue, Shavranov, Taylor and Rosenbluth all developed the idea of adding a second magnetic field to the system, a steady-state toroidal field generated by magnets circling the vacuum tube. The second field would force the electrons and deuterons in the plasma to orbit the lines of force, reducing the effects of small imperfections in the field generated by the pinch itself. This sparked off considerable interest in both the US and UK. Thomson, armed with the possibility of a workable device and obvious interest in the US, won approval for a very large machine, ZETA.
Sceptre

At Aldermaston, using the same information, Ware's team calculated that with the 60 kJ available in the existing capacitor bank, they would reach the required conditions in a copper-covered quartz tube 2 inches in bore and 10 inches in diameter, or an all-copper version 2 inches in bore and 18 inches across. Work on both started in parallel, as Sceptre I and II.[7]

However, before either was completed, the ZETA team at Harwell had already achieved stable plasmas in August 1957. The Aldermaston team raced to complete their larger photographic system. Electrical arcing and shorting between the tube segments became a problem, but the team had already learned that "dry firing" the apparatus hundreds of times would reduce this effect.[8] After addressing the arcing, further experiments demonstrated temperatures around 1 million degrees.[9] The system worked as expected, producing clear images of the kink instabilities using high-speed photography and argon gas so as to produce a bright image.[5]

The team then removed the straight sections, added stabilization magnets, and re-christened the machine Sceptre III.[5] In December they started experimental runs like those on ZETA. By measuring the spectral lines of oxygen, they calculated interior temperatures of 2 to 3.5 million degrees. Photographs through a slit in the side showed the plasma column remaining stable for 300 to 400 microseconds, a dramatic improvement on previous efforts. Working backward, the team calculated that the plasma had an electrical resistivity around 100 times that of copper, and was able to carry 200 kA of current for 500 microseconds in total. When the current was over 70 kA, neutrons were observed in roughly the same numbers as ZETA.[9]

As in the case of ZETA, it was soon learned that the neutrons were being produced by a spurious source, and the temperatures were due to turbulence in the plasma, not the average temperature.[10]
Sceptre IV

As the ZETA debacle played out in 1958, solutions to the problems seen in ZETA and Sceptre IIIA were hoped to be simple: a better tube, higher vacuum, and denser plasma. As the Sceptre machine was much less expensive and the high-power capacitor bank already existed, the decision was made to test these concepts with a new device, Sceptre IV.[11]

However, none of these techniques helped. Sceptre IV proved to have the same performance problems as the earlier machines.[11] Sceptre IV proved to be the last major "classic" pinch device built in the UK.
Notes

Allibone, p. 17
Herman, p. 40
Herman, p. 41
Thomson, p. 12
Review, p. 170
Thonemann, p. 34
Allibone, p. 18
Review, p. 174
Allibone, p. 19
Thomas Edward Allibone, "A Guide to Zeta Experiments", New Scientist, 18 June 1959, p. 1360

Allen, N L; Balfour, D; Cloke, V C; Green, L A; Hemmings, R F; Hughes, T P; Hunt, S E; Jordan, B; et al. (1962). "The sceptre IV toroidal discharge". Journal of Nuclear Energy. Part C, Plasma Physics, Accelerators, Thermonuclear Research. 4 (6): 375. Bibcode:1962JNuE....4..375A. doi:10.1088/0368-3281/4/6/301.

References

George Thomson, "Thermonuclear Fusion: The Task and the Triumph", New Scientist, 30 January 1958, pp. 11–13
Thomas Edward Allibone, "Controlling the Discharge", New Scientist, 30 January 1958, pp. 17–19
Robin Herman, "Fusion: the search for endless energy", Cambridge University Press, 1990 ISBN 0-521-38373-0

Peter Thonemann, "Controlled Thermonuclear Research in the United Kingdom", 2nd Geneva Conference on Peaceful Uses of Atomic Energy, Session P/78
(Review) Allibone, Chick, Thomson and Ware, "Review of Controlled Thermonuclear Research at A.E.I. Research Laboratory, 2nd Geneva Conference on Peaceful Uses of Atomic Energy, Session P/78

vte

Fusion power, processes and devices
Core topics

Nuclear fusion
Timeline List of experiments Nuclear power Nuclear reactor Atomic nucleus Fusion energy gain factor Lawson criterion Magnetohydrodynamics Neutron Plasma

Processes,
methods
Confinement
type
Gravitational

Alpha process Triple-alpha process CNO cycle Fusor Helium flash Nova
remnants Proton-proton chain Carbon-burning Lithium burning Neon-burning Oxygen-burning Silicon-burning R-process S-process

Magnetic

Dense plasma focus Field-reversed configuration Levitated dipole Magnetic mirror
Bumpy torus Reversed field pinch Spheromak Stellarator Tokamak
Spherical Z-pinch

Inertial

Bubble (acoustic) Laser-driven Magnetized Liner Inertial Fusion

Electrostatic

Fusor Polywell

Other forms

Colliding beam Magnetized target Migma Muon-catalyzed Pyroelectric

Devices,
experiments
Magnetic
confinement
Tokamak
International

ITER DEMO PROTO

Americas

Canada STOR-M United States Alcator C-Mod ARC
SPARC DIII-D Electric Tokamak LTX NSTX
PLT TFTR Pegasus Brazil ETE Mexico Novillo [es]

Asia,
Oceania

China CFETR EAST
HT-7 SUNIST India ADITYA SST-1 Japan JT-60 QUEST [ja] Pakistan GLAST South Korea KSTAR

Europe

European Union JET Czech Republic COMPASS GOLEM [cs] France TFR WEST Germany ASDEX Upgrade TEXTOR Italy FTU IGNITOR Portugal ISTTOK Russia T-15 Switzerland TCV United Kingdom MAST-U START STEP

Stellarator
Americas

United States CNT CTH HIDRA HSX Model C NCSX Costa Rica SCR-1

Asia,
Oceania

Australia H-1NF Japan Heliotron J LHD

Europe

Germany WEGA Wendelstein 7-AS Wendelstein 7-X Spain TJ-II Ukraine Uragan-2M
Uragan-3M [uk]

RFP

Italy RFX United States MST

Magnetized target

Canada SPECTOR United States LINUS FRX-L – FRCHX Fusion Engine

Other

Russia GDT United States Astron LDX Lockheed Martin CFR MFTF
TMX Perhapsatron PFRC Riggatron SSPX United Kingdom Sceptre Trisops ZETA

Inertial
confinement
Laser
Americas

United States Argus Cyclops Janus LIFE Long path NIF Nike Nova OMEGA Shiva

Asia

Japan GEKKO XII

Europe

European Union HiPER Czech Republic Asterix IV (PALS) France LMJ LULI2000 Russia ISKRA United Kingdom Vulcan

Non-laser

United States PACER Z machine

Applications

Thermonuclear weapon
Pure fusion weapon

International Fusion Materials Irradiation Facility ITER Neutral Beam Test Facility

Physics Encyclopedia

World

Index

Hellenica World - Scientific Library

Retrieved from "http://en.wikipedia.org/"
All text is available under the terms of the GNU Free Documentation License