ART

A dielectric mirror, also known as a Bragg mirror, is a type of mirror composed of multiple thin layers of dielectric material, typically deposited on a substrate of glass or some other optical material. By careful choice of the type and thickness of the dielectric layers, one can design an optical coating with specified reflectivity at different wavelengths of light. Dielectric mirrors are also used to produce ultra-high reflectivity mirrors: values of 99.999% or better over a narrow range of wavelengths can be produced using special techniques. Alternatively, they can be made to reflect a broad spectrum of light, such as the entire visible range or the spectrum of the Ti-sapphire laser. Mirrors of this type are very common in optics experiments, due to improved techniques that allow inexpensive manufacture of high-quality mirrors. Examples of their applications include laser cavity end mirrors, hot and cold mirrors, thin-film beamsplitters, high damage threshold mirrors, and the coatings on modern mirrorshades.

Mechanism

Dielectric mirror diagram

Diagram of a dielectric mirror. Thin layers with a high refractive index n1 are interleaved with thicker layers with a lower refractive index n2. The path lengths lA and lB differ by exactly one wavelength, which leads to constructive interference.

Dielectric mirrors function based on the interference of light reflected from the different layers of dielectric stack. This is the same principle used in multi-layer anti-reflection coatings, which are dielectric stacks which have been designed to minimize rather than maximize reflectivity. Simple dielectric mirrors function like one-dimensional photonic crystals, consisting of a stack of layers with a high refractive index interleaved with layers of a low refractive index (see diagram). The thicknesses of the layers are chosen such that the path-length differences for reflections from different high-index layers are integer multiples of the wavelength for which the mirror is designed. The reflections from the low-index layers have exactly half a wavelength in path length difference, but there is a 180-degree difference in phase shift at a low-to-high index boundary, compared to a high-to-low index boundary, which means that these reflections are also in phase. In the case of a mirror at normal incidence, the layers have a thickness of a quarter wavelength.
The color transmitted by the dielectric filters shifts when the angle of incident light changes.

Other designs have a more complicated structure generally produced by numerical optimization. In the latter case, the phase dispersion of the reflected light can also be controlled (see Chirped mirror). In the design of dielectric mirrors, an optical transfer-matrix method can be used.

Dielectric mirrors exhibit retardance as a function of angle of incidence and mirror design.[1]
Manufacturing
An electron microscope image of an approximately 13 micrometre piece of dielectric mirror being cut from a larger substrate. Alternating layers of Ta2O5 and SiO2 are visible on the bottom edge.

The manufacturing techniques for dielectric mirrors are based on thin-film deposition methods. Common techniques are physical vapor deposition (which includes evaporative deposition and ion beam assisted deposition), chemical vapor deposition, ion beam deposition, molecular beam epitaxy, and sputter deposition. Common materials are magnesium fluoride (n = 1.37), silicon dioxide (n = 1.45), tantalum pentoxide (n = 2.28) , zinc sulfide (n = 2.32), and titanium dioxide (n = 2.4).

Polymeric dielectric mirrors are fabricated industrially via co-hextrusion of melt polymers,[2] and by spin-coating[3] or dip-coating[4] on smaller scale.
See also

Distributed Bragg reflector
Dichroic filter
Perfect mirror

References

"Phase retardance of periodic multilayer mirrors",J. H. Apfel Applied Optics 21, 733-738 (1982)
Organic and Hybrid Photonic Crystals. 2015.
Lova, Paola; Giusto, Paolo; Stasio, Francesco Di; Manfredi, Giovanni; Paternò, Giuseppe M.; Cortecchia, Daniele; Soci, Cesare; Comoretto, Davide (9 May 2019). "All-polymer methylammonium lead iodide perovskite microcavities". Nanoscale. 11 (18): 8978–8983. doi:10.1039/C9NR01422E. ISSN 2040-3372.

Russo, Manuela; Campoy‐Quiles, Mariano; Lacharmoise, Paul; Ferenczi, Toby A. M.; Garriga, Miquel; Caseri, Walter R.; Stingelin, Natalie (2012). "One-pot synthesis of polymer/inorganic hybrids: toward readily accessible, low-loss, and highly tunable refractive index materials and patterns". Journal of Polymer Science Part B: Polymer Physics. 50 (1): 65–74. doi:10.1002/polb.22373. ISSN 1099-0488.

External links

Fast code for computation of dielectric mirror reflectivity and dispersion

List of laser articles

Physics Encyclopedia

World

Index

Hellenica World - Scientific Library

Retrieved from "http://en.wikipedia.org/"
All text is available under the terms of the GNU Free Documentation License