ART

Microvoid coalescence (MVC) is a high energy microscopic fracture mechanism observed in the majority of metallic alloys and in some engineering plastics.
MVC fracture surface morphologies for a) tension, b) shear, and c) bending failures

Fracture process

MVC proceeds in three stages: nucleation, growth, and coalescence of microvoids. The nucleation of microvoids can be caused by particle cracking or interfacial failure between precipitate particles and the matrix. Additionally, microvoids often form at grain boundaries or inclusions within the material.[1][2] Microvoids grow during plastic flow of the matrix, and microvoids coalesce when adjacent microvoids link together or the material between microvoids experiences necking. Microvoid coalescence leads to fracture.[3] Void growth rates can be predicted assuming continuum plasticity using the Rice-Tracey model:[2][4]

\( {\displaystyle \ln \left({\frac {\bar {R}}{R_{0}}}\right)=\int \limits _{0}^{\epsilon _{q}}A\left({\frac {3\sigma _{m}}{2\sigma _{ys}}}\right)d\epsilon _{v}^{p}} \)

where A is a constant typically equal to 0.283 (but dependent upon the stress triaxiality), \( {\displaystyle \sigma _{ys}} \) is the yield stress, \( \sigma _{m} \) is the mean stress, \( {\displaystyle \epsilon _{q}} \) is the equivalent Von Mises plastic strain, \( R_{o} \) is the particle size, and \( {\bar {R}} \) produced by the stress triaxality:

\( {\displaystyle {\bar {R}}={\frac {R_{1}+R_{2}+R_{3}}{3}}} \)

Fracture surface morphologies

Microvoid

MVC fracture surface morphologies for a) tension, b) shear, and c) bending failures

MVC can result in three distinct fracture morphologies based on the type of loading at failure. Tensile loading results in equiaxed dimples, which are spherical depressions a few micrometres in diameter that coalesce normal to the loading axis. Shear stresses will result elongated dimples, which are parabolic depressions that coalesce in planes of maximum shear stress. The depressions point back to the crack origin, and shear influenced failure will produce depressions that point in opposite directions on opposing fracture surfaces. Combined tension and bending will also produce the elongated dimple morphology, but the directions of the depressions will be in the same direction on both fracture surfaces.

Ductile Fracture Surface 6061-T6 Al SEM

SEM image of microvoid coalescence seen on a ductile fracture surface of 6061-T6 Al

References

Askeland, Donald R. (January 2015). The science and engineering of materials. Wright, Wendelin J. (Seventh ed.). Boston, MA. pp. 236–237. ISBN 978-1-305-07676-1. OCLC 903959750.
Soboyejo, W.O (2003). Mechanical properties of engineered materials. Marcel Dekker. pp. 393–394. ISBN 0-203-91039-7. OCLC 54091550.
Hertzberg, Richard W. Deformation and Fracture Mechanics of Engineering Materials, Fourth Edition. John Wiley and Sons, Inc, Hoboken, NJ: 1996.
Comprehensive structural integrity. Milne, I., Ritchie, R. O., Karihaloo, B. L. (1st ed.). Amsterdam: Elsevier/Pergamon. 2003. pp. 186–192. ISBN 978-0-08-049073-1. OCLC 190802556.

Physics Encyclopedia

World

Index

Hellenica World - Scientific Library

Retrieved from "http://en.wikipedia.org/"
All text is available under the terms of the GNU Free Documentation License